How to Replace a Toilet: A Step-by-Step Guide

Replacing a toilet can seem like a daunting task, but with the right tools and a little know-how, it can be done in a few simple steps. This guide will walk you through the process of removing your old toilet and installing a new one.

Step 1: Gather your tools. You will need a new toilet, a wrench, a rubber mallet, a putty knife, and a caulking gun.

Step 2: Turn off the water supply. The water supply to your toilet is typically located behind it, so you will need to turn off the valve before starting the replacement process.

Step 3: Drain the toilet tank. Flush the toilet and then use a sponge or towel to soak up any remaining water in the tank and bowl.

Step 4: Remove the old toilet. Use the wrench to loosen the nuts that hold the toilet to the floor. Carefully lift the toilet and set it aside. Scrape away any old wax seal using the putty knife.

Step 5: Install the new wax seal. Place the new wax seal on the flange and press it down firmly using the rubber mallet.

Step 6: Set the new toilet. Carefully set the new toilet in place, making sure that it is properly aligned with the flange. Use the bolts to secure the toilet to the floor.

Step 7: Connect the water supply. Attach the water supply line to the new toilet and turn the water supply back on.

Step 8: Test for leaks. Flush the toilet and check for any leaks around the base. If everything is secure and there are no leaks, use the caulking gun to seal any gaps between the toilet and the floor.

Step 9: Enjoy your new toilet!

In summary, replacing a toilet is a simple task that can be completed with the right tools and a step-by-step guide. Remember to turn off the water supply, remove the old toilet, install the new wax seal, set the new toilet, connect the water supply, test for leaks and seal any gaps and enjoy your new toilet.